K&R GT600-4T132G User Manual page 327

Appendix A Standards Compliance
■
12
- 324 -
Common-mode Filter
The common-mode filter is installed on output side (close to AC drive) to reduce bearing
current and reduce interference on surrounding devices.
The following figure shows installation of common-mode filter.
The following figure shows physical appearance of ferrite core.
Common-mode Filter Model
DY644020H
DY805020H
DY1207030H
U V W PE
Cable length
< 300 mm
Magnetic ring
(wind three turns)
SN Dimensions (Outer Diameter x Inner
Diameter x Thickness) (mm)
11013031 64 x 40 x 20
11013032 80 x 50 x 20
11013033 120 x 70 x 30