K&R GT600-4T132G User Manual page 76

4. Operating Panel (Keypad & Display)
■
Relevant Parameters for Operating Panel Setting
Function Code
F7-01
F7-02
FP-03
4
■
Status Indicators
There are four red LED status indicators at the top of the operating panel.
Indicator
RUN
LOCAL/REMOT
FWD/REV
TUNE/TC
- 74 -
Parameter Name Setting Range
MF.K key function 0: MF.K key disabled
selection
1: Switchover from remote control (terminal or
communication) to keypad control
2: Switchover between forward rotation and
reverse rotation
3: Forward jog
4: Reverse jog
STOP/RESET key 0: STOP/RESET key enabled only in keypad
function control
1: STOP/RESET key enabled in any operation
mode
For user defined and user modified parameters
Parameter display
property
00: non of them will display
01: user defined parameters will display
10: user modified parameters will display
11: both of them will display
Indication
OFF indicates the STOP status.
ON indicates the RUNNING status.
OFF indicates under operating panel control.
ON indicates under terminal control.
FLASHING indicates under serial communication control.
OFF indicates reverse motor rotation.
ON indicates forward motor rotation.
ON indicates torque control mode.
FLASHING SLOWLY (once a second) indicates auto-tuning status.
FLASHING QUICKLY (four times a second) indicates a fault condition.
Default
0
1
00