■
Keys on LED Operating Panel
Key
Key Name
Programming
PRG
Confirm
ENTER
Increment
Decrement
Shift
RUN
RUN
Stop/Reset
STOP
RES
Multifunction
MF.K
Menu mode
QUICK
selection
Function
●
Enter or exit Level I menu.
●
Return to the previous menu.
●
Enter each level of menu interface.
●
Confirm displayed parameter setting.
●
When navigating a menu, it moves the selection up through the
screens available.
●
When editing a parameter value, it increases the displayed value.
●
When the AC drive is in RUN mode, it increases the speed.
●
When navigating a menu, it moves the selection down through the
screens available.
●
When editing a parameter value, it decreases the displayed value.
●
When the AC drive is in RUNNING mode, it decreases the speed.
●
Select the displayed parameter in the STOP or RUNNING status.
●
Select the digit to be modified when modifying a parameter value
Start the AC drive when using the operating panel control mode.
It is inactive when using the terminal or communication control mode.
●
Stop the AC drive when the drive is in the RUNNING status.
●
Perform a reset operation when the drive is in the FAULT status.
Note: The functions of this key can be restricted by using function F7-02.
Perform a function switchover as defined by the setting of F7-01, for
example to quickly switch command source or direction.
Press it to switch over between menu modes as defined by the setting of
FP-03.
4. Operating Panel (Keypad & Display)
4
- 73 -