K&R GT600-4T132G User Manual page 169

Function Code Parameter Name Setting Range
F7-05 LED display stop
parameters
●
Once the AC drive is re-powered on after power down, the display includes the
Note
selected parameters before power down by default.
●
If parameters to be monitored cannot be found in F7-03, F7-04 and F7-05, view
them in group U0.
■
View Parameters in Group U0
You can view parameter values by using operation panel, convenient for on-site commissioning,
or from the host computer by means of communication (address: 0x7000-0x7044).
U0-00 to U0-31 are the monitoring parameters in the running and stop status defined by F7-03
and F7-04.
Function Code
Group U0: Monitoring Parameters
U0-00
U0-01
U0-02
U0-03
U0-04
U0-05
U0-06
0000 to FFFF
7 6 5 4
15 14 13
If a parameter needs to be displayed during
running, set corresponding bit to 1, and set F7-05 to
hexadecimal equivalent.
Parameter Name
Running frequency
Frequency reference
Bus voltage
Output voltage
Output current
Output power
Output torque
6. Description of Parameters
3 2 1 0
Frequency reference (Hz)
Bus voltage (V)
DI state
DO state
AI1 voltage (V)
AI2 voltage (V)
AI3 voltage (V)
Count value
12 11 10 9 8
Length value
PLC stage
Load speed
PID reference
Pulse reference (kHz)
Reserved
Reserved
Reserved
Display Range
0.00 to 500.00 Hz
0.00 to 500.0 Hz
0.0 to 3000.0 V
0 to 1140 V
0.00 to 655.35 A (AC drive power ≤ 55 kW)
0.0 to 6553.5 A (AC drive power > 55 kW)
0 to 32767
-200.0% to 200.0%
Default
1F
6
- 167 -