Chapter5 Power Supply Module; Base Unit That Can Be Used In Combination With Power Supply Module - Mitsubishi Melsec-Q Series User Manual

Hide thumbs Also See for Melsec-Q Series:

Table of Contents

CHAPTER5 POWER SUPPLY MODULE

This chapter describes the specifications of the power supply modules applicable for the programmable controller

system (The Q Series power supply module, slim type power supply module, redundant power supply module and

AnS/A Series power supply module) and how to select the most suitable module.

5.1 Base Unit that Can Be Used in Combination with Power Supply

This section describes the base unit that can be used in combination with the power supply module respectively.

For details of the CPU modules and base units, refer to the following.

For details of the system configuration, refer to CHAPTER 2.

Table5.1 Base unit that can be used in combination with power supply module

*1: When mounting the Q64RP to the Q65WRB, use the Q64RP whose serial number (first six digits) is "081103" or later.

The vibration condition described in the general specifications may not be met if the serial number (first six digits) of the Q64RP is

"081102" or earlier is mounted.

*2: The QA6ADP+A6 B also has the equivalent specifications.

Main base unit

Extension base unit

: Combination available

: Combination not available

Show Quick Links

Table of Contents