Table of Contents
Advertisement
Serial port
WebUI
1. Log into the Connect EZ WebUI as a user with Admin access.
2. On the menu, click System > Configuration > Device Configuration.
3. Expand Services.
4. Expand RealPort.
5. Click Enable to enable the RealPort service.
6. For RealPort Server Port, enter 1027.
7. Enable Encryption to enable encryption of data. This is enabled by default.
8. (Optional) For Shared Secret, enter the key to ensure secure communication. Leave this field
blank to disable authentication.
9. Enable Exclusive Mode to ensure that any connection from an IP address is closed when
opening a new connection from the same IP address. This disabled by default.
10. Enable RealPort Keepalive to send RealPort keepalive packets. This is enabled by default.
11. Enable TCP Port Keepalive to send TCP keepalive packets. This is disabled by default.
12. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.
Configure UDP serial mode
The UDP serial mode option in the serial port configuration provides access to the serial port using
UDP.
To change the configuration to match the serial configuration of the device to which you want to
connect:
WebUI
1. Log into the Connect EZ WebUI as a user with Admin access.
2. On the menu, click System. Under Configuration, click Serial Configuration.
The Serial Configuration page is displayed.
Note
You can also configure the serial port by using Device Configuration > Serial. Changes
made by using either Device Configuration or Serial Configuration will be reflected in both.
Digi Connect EZ Mini User Guide
Configure UDP serial mode
101
Advertisement
Table of Contents
