Digi Connect EZ Mini User Manual page 43

Configuration and management
vpn
(config)>
The allowed values for path are listed in the first (left) column.
4. To determine further allowed path location values by using the ? (question mark) with
the path name:
(config> service ?
Services
Additional Configuration
-------------------------------------------------------------------
------------
dns
iperf
location
mdns
modbus_gateway
multicast
ntp
ping
snmp
ssh
telnet
web_admin
(config)> service
For example, to use curl to return the ssh configuration:
$ curl -k -u admin https://192.168.210.1/cgi-bin/config.cgi/value/service/ssh -
X GET
Enter host password for user 'admin':
{
ok": true,
"result": {
,
"acl.zone.0": "internal"
,
"acl.zone.1": "edge"
,
"acl.zone.2": "ipsec"
,
"acl.zone.3": "setup"
,
"enable": "true"
,
"key": ""
,
"mdns.enable": "true"
,
Digi Connect EZ Mini User Guide
Use the local REST API to configure the Connect EZ device
"type": "object",
"path": "service.ssh"
"collapsed": {
VPN
DNS
IPerf
Location
Service Discovery (mDNS)
Modbus Gateway
Multicast
NTP
Ping responder
SNMP
SSH
Telnet
Web administration
43