Table of Contents
Advertisement
Virtual Private Networks (VPN)
b. Click to expand Local traffic selector.
c. For Type, select one of the following:
n
n
n
n
n
d. For Protocol, select one of the following:
n
n
n
n
n
e. For Port, type the port matching criteria.
Allowed values are a port number, a range of port numbers, or any.
f. (Optional) Click to expand Remote traffic selector.
g. For Remote network, enter the IP address and optional netmask of the remote network.
h. For Protocol, select one of the following:
n
n
n
n
n
Digi Connect EZ Mini User Guide
Address: The address of a local network interface.
For Address, select the appropriate interface.
Network: The subnet of a local network interface.
For Address, select the appropriate interface.
Custom network: A user-defined network.
For Custom network, enter the IPv4 address and optional netmask.
Request a network: Requests a network from the remote peer.
Dynamic: Uses the address of the local endpoint.
Any: Matches any protocol.
TCP: Matches TCP protocol only.
UDP: Matches UDP protocol only.
ICMP: Matches ICMP requests only.
Other protocol: Matches an unlisted protocol.
If Other protocol is selected, type the number of the protocol.
Any: Matches any protocol.
TCP: Matches TCP protocol only.
UDP: Matches UDP protocol only.
ICMP: Matches ICMP requests only.
Other protocol: Matches an unlisted protocol.
If Other protocol is selected, type the number of the protocol.
IPsec
131
Advertisement
Table of Contents
