Digi Connect EZ Mini User Manual page 70

Firmware version 22.2
Hide thumbs Also See for Connect EZ Mini:
Table of Contents

Advertisement

Interfaces
The IPv4 Maximum Transmission Unit (MTU) of the WAN.
n
When to use DNS servers for this interface.
l
Whether to include the Connect EZ device's hostname in DHCP requests.
l
Active recovery configuration. See
l
failures
MAC address blacklist and whitelist.
n
To create a new WAN or edit an existing WAN:
  WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights
2. On the menu, click System. Under Configuration, click Device Configuration.
3. The Configuration window is displayed.
4. Click Network > Interfaces.
5. Create the WAN or select an existing WAN:
To create a new WAN, for Add interface, type a name for the WAN and click .
n
To edit an existing WAN, click to expand the WAN.
n
The Interface configuration window is displayed.
New WANs are enabled by default. To disable, click Enable.
6. For Interface type, leave at the default setting of Ethernet.
7. For Zone, select External.
8. For Device, select an Ethernet device.
9. Configure IPv4 settings:
a. Click to expand IPv4.
IPv4 support is enabled by default.
b. For Type, select DHCP address.
c. Optional IPv4 configuration items:
i. Set the Metric.
ii. See
metrics.
iii. For Weight, type the relative weight for default routes associated with this interface.
For multiple active interfaces with the same metric, Weight is used to load balance
traffic to the interfaces.
iv. Set the Management priority. This determines which interface will have priority for
central management activity. The interface with the highest number will be used.
v. Set the MTU.
vi. For Use DNS, select one of the following:
Digi Connect EZ Mini User Guide
for further information.
Configure WAN priority and default route metrics
Always: DNS will always be used for this WAN; when multiple interfaces have
n
the same DNS server, the interface with the lowest metric will be used for DNS
requests.
When primary default route: Only use the DNS servers provided for this
n
Configure SureLink active recovery to detect WAN
for further information about
Wide Area Networks (WANs)
70

Advertisement

Table of Contents
loading

Table of Contents