Table of Contents
Advertisement
Serial port
7. Select the Encrypt Network Traffic check box to enable encrypted network traffic. When you
select this option, the TCP Port for Encrypted Traffic field becomes available.
8. The TCP Port for Encrypted Traffic field has a default value of 1027. The entry must match
the device's TCP port setting. You can verify the setting on the device using the web interface
on the device.
a. Open browser window.
b. Enter the IP address in the URL address bar to access the web interface.
c. Choose Network > Network Services Settings.
d. Select the Enable Encrypted RealPort option and verify that the port number is 1027.
e. Click Apply.
9. Click OK.
10. Click Apply.
Configure the serial port for RealPort mode
RealPort mode allows you to use Realport.
To change the configuration to match the serial configuration of the device to which you want to
connect:
WebUI
Digi Connect EZ Mini User Guide
Configure RealPort mode
97
Advertisement
Table of Contents
