Table of Contents
Advertisement
Configuration and management
Log out of the web interface
On the main menu, click your user name. Click Log out.
n
Use the local REST API to configure the Connect EZ device
Your Connect EZ device includes a REST API that can be used to return information about the device's
configuration and to make modifications to the configuration. You can view the REST API specification
from your web browser by opening the URL:
https://ip-address/cgi-bin/config.cgi
For example:
https://192.168.210.1/cgi-bin/config.cgi
Use the GET method to return device configuration information
To return device configuration, issue the GET method. For example, using curl:
$ curl -k -u admin https://ip-address/cgi-bin/config.cgi/value/path -X GET
where:
ip-address is the IP address of the Connect EZ device.
n
path is the path location in the configuration for the information being returned.
n
To determine allowed values for path from the Admin CLI:
1. Log into the Connect EZ command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. At the config prompt, type ? (question mark):
(config)> ?
auth
cloud
firewall
monitoring
network
serial
service
system
Digi Connect EZ Mini User Guide
Use the local REST API to configure the Connect EZ device
Authentication
Central management
Firewall
Monitoring
Network
Serial
Services
System
42
Advertisement
Table of Contents
