Digi Connect EZ Mini User Manual page 362

Firmware version 22.2
Hide thumbs Also See for Connect EZ Mini:
Table of Contents

Advertisement

Applications
(Optional) Configure the script to run only a single instance at a time:
l
If once is set to false, a new instance of the script will be started at every interval,
regardless of whether the script is still running from a previous interval.
set_time: Runs the script at a specified time of the day.
n
If set_time is set, set the time that the script should run, using the format HH:MM:
l
maintenance_time: The script will run during the system maintenance time window.
n
6. Set the commands that will execute the script:
(config system schedule script 0)> commands filename
(config system schedule script 0)>
where filename is the path and filename of the script, and any related command line
information.
If the script begins with #!, then the script will be invoked in the location specified by the path
for the script command. Otherwise, the default shell will be used (equivalent to #!/bin/sh).
7. Script logging options:
To log the script's output to the system log:
n
(config system schedule script 0)> syslog_stdout true
(config system schedule script 0)>
To log script errors to the system log:
n
(config system schedule script 0)> syslog_stderr true
(config system schedule script 0)>
If syslog_stdout and syslog_stderr are not enabled, only the script's exit code is written to the
system log.
8. Set the maximum amount of memory available to be used by the script and its subprocesses:
(config system schedule script 0)> max_memory value
(config system schedule script 0)>
where value uses the syntax number{b|bytes|KB|k|MB|MB|M|GB|G|TB|T}.
9. To run the script only once at the specified time:
(config system schedule script 0)> once true
(config system schedule script 0)>
If once is enabled, rebooting the device will cause the script to run again. The only way to re-
run the script is to:
Digi Connect EZ Mini User Guide
(config system schedule script 0)> once true
(config system schedule script 0)>
(config system schedule script 0)> run_time HH:MM
(config system schedule script 0)>
Configure scripts to run automatically
362

Advertisement

Table of Contents
loading

Table of Contents