Step 2: Connect The Power Supply - Digi Connect EZ Mini User Manual

Get started with Connect EZ
Equipment Description
Power Each kit includes a power supply. The power supply is a Direct Plugin Class 2 output
supply transformer rated 18 W, 12 VDC, and with a 1.5 A output.
For information about connecting the power supply, see
supply.
Ethernet Connect to a site network using an Ethernet cable. See
cable network using an Ethernet
DIN rail clip The DIN rail clip connects to the back of the device and is used to mount the device
kit onto a DIN rail.
See
The kit includes a DIN rail clip and two screws that meet these requirements:
Loose label A loose label sticker that includes information about the device is included in the
box. You should retain this label sticker with your hardware records. For more
information about the label, see
Note
password will be needed if the device is factory reset and you want to access the
web UI on the device.
Global plug
If you purchased the GLB version of the device, a kit that includes global outlet plugs
kit
is included.

Step 2: Connect the power supply

The power supply is included with the device.
The power supply is a Direct Plugin Class 2 output transformer rated 18 W, 12 VDC, with 1.5 A output.
1. Orient the device so the top of the device is facing you.
Digi Connect EZ Mini User Guide
Back panel
n
LAN.
Attach to DIN rail with clip.
M4 in diameter
n
5 mm in length
n
Countersunk
n
Phillips #2
n
Black Steel
n
This label includes the unique default password for the device. This unique
Step 2: Connect the power supply
Step 2: Connect the power
Step 3: Connect to site
Loose label sample.
17