Digi Connect EZ Mini User Manual page 143

Firmware version 22.2

Hide thumbs Also See for Connect EZ Mini:

Table of Contents

Virtual Private Networks (VPN)

ii. Set the type of encryption to use during phase 1:

(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)>

cipher value

(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)>

where value is one of 3des, aes128, aes192, aes256, or null. The default is 3des.

iii. Set the type of hash to use during phase 1 to verify communication integrity:

(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)>

(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)>

where value is one of md5, sha1, sha256, sha384, or sha512. The default is sha1.

iv. Set the type of Diffie-Hellman group to use for key exchange during phase 1:

i. Use the ? to determine available Diffie-Hellman group types:

ii. Set the Diffie-Hellman group type:

The default is modp2048.

v. (Optional) Add additional phase 1 proposals:

i. Move back one level in the schema:

ii. Add an additional proposal:

iii. Repeat to add more phase 1 proposals.

Digi Connect EZ Mini User Guide

(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)>

(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)>

dh_group value

(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)>

(config vpn ipsec tunnel ipsec_example ike phase1_proposal)>

(config vpn ipsec tunnel ipsec_example ike phase1_proposal 1)>

Repeat the above steps to set the type of encryption, hash, and Diffie-Hellman

group for the additional proposal.