Table of Contents
Advertisement
Serial port
4. In the Device Filters section, a list of the Connect EZ types display. All types are disabled by
default, and when all are disabled, all types are displayed.
5. To filter the types that are displayed, click the enable slider for the types you want to display.
Only the enabled types will display, and all other types remain disabled and do not display.
6. Click Filters at the bottom of the expanded toolbar to minimize the toolbar and hide the
filters.
Access Digi Remote Manager from the Digi Navigator
You can access Digi Remote Manager from the Digi Navigator. Within the Remote Manager, you can
configure and monitor your Connect EZ.
For information about using Digi Remote Manager, refer to the
1. Make sure you have the device powered and connected the device to your network or
computer with an Ethernet cable. See
2. Launch the Digi Navigator.
3. Click the Digi Remote Manager link in the toolbar.
4. The Digi Remote Manager login screen launches.
a. Enter your Remote Manager user name and password.
b. Click Login.
Digi Connect EZ Mini User Guide
Digi Remote Manager User
Connect to and access the Digi
Digi Navigator application
Guide.
Navigator.
121
Advertisement
Table of Contents
