Table of Contents
Advertisement
Interfaces
test
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show Surelink status for all OpenVPN clients
To show the Surelink status all OpenVPN clients, use the
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type :
> show surelink openvpn all
OpenVPN Client
--------------
test_client1
test_client1
test_client2
test_client2
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show Surelink status for a specific OpenVPN client
To show the Surelink status a specific OpenVPN client, use the
command:
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show surelink openvpn client name
OpenVPN client, for example:
> show surelink openvpn client test_client1
OpenVPN Client
--------------
test_client1
test_client1
Digi Connect EZ Mini User Guide
194.43.79.75 (Ping)
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
194.43.79.74 (Ping)
194.43.79.75 (Ping)
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
Show Surelink status and statistics
5 seconds
Passed
show surelink openvpn client all
Last Response
-------------
29 seconds
5 seconds
21 seconds
21 seconds
show surelink openvpn client name
command to show the Surelink status of a specific
Last Response
-------------
29 seconds
5 seconds
command:
Status
------------------
Passed
Passed
Failed
Waiting for result
Status
------------------
Passed
Passed
80
Advertisement
Table of Contents
