Table of Contents
Advertisement
File system
Download files
1. Log into the Connect EZ WebUI as a user with Admin access.
2. On the menu, click System. Under Administration, click File System.
The File System page appears.
3. Highlight the directory to which the file will be uploaded and click to open the directory.
4. Highlight the appropriate file and click (download).
Upload and download files by using the Secure Copy command
Copy a file from a remote host to the Connect EZ device
To copy a file from a remote host to the Connect EZ device, use the
> scp host hostname-or-ip user username remote remote-path local local-path to
local
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied to the
n
Connect EZ device.
local-path is the location on the Connect EZ device where the copied file will be placed.
n
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the Connect EZ device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/Connect EZ-
22.2.9.85.bin local /etc/config/scripts to local
admin@192.168.4.1's password: adminpwd
Connect EZ-22.2.9.85.bin
>
Digi Connect EZ Mini User Guide
Upload and download files
scp
command as follows:
100%
36MB
11.1MB/s
00:03
571
Advertisement
Table of Contents
