Table of Contents
Advertisement
Hardware
Use the ERASE button to reset your device to the factory
defaults
You can reset the Connect EZ to the factory default settings. Resetting the device to factory defaults
performs the following actions:
Clears all configuration settings.
n
All firmware updates are deleted.
n
Deletes all user files.
n
Regenerates SSH keys.
n
Clears event and system log files.
n
Creates a new event in the event log, indicating a factory reset.
n
Note
While the settings are reset, the device's firmware version remains the same.
1. Make sure that the Connect EZ has been powered on for at least 30 seconds.
2. Locate the Erase button on the
3. Using a pinhole tool, press and briefly hold the Erase button.
4. The device resets to factory defaults and then reboots automatically.
Discover the device's IP address: Additional methods
The IP address is used to login to the Web UI for the device. If you do not have access to the
Navigator, you can use either of these methods to discover the IP address.
Discover the IP address using a Micro USB cable
n
Manually configure the PC and assign an IP address to the device
n
Discover the IP address using a Micro USB cable
You can use a Micro USB cable and a terminal emulation application to determine the device's
IP address.
Digi Connect EZ Mini User Guide
Use the ERASE button to reset your device to the factory defaults
back of the
device.
Digi
31
Advertisement
Table of Contents
