Table of Contents
Advertisement
Services
Format:
Africa/Abidjan
Africa/Accra
Africa/Addis_Ababa
...
(config)>
4. (Optional) Add an upstream NTP server that the device will use to synchronize its time to the
appropriate location in the list of NTP servers. The default setting is time.devicecloud.com.
To delete the default NTP server, time.devicecloud.com:
n
(config)> del service ntp server 0
(config)>
To add the NTP server to the beginning of the list, use the index value of 0 to indicate
n
that it should be added as the first server:
(config)> add service ntp server 0 time.server.com
(config)>
To add the NTP server to the end of the list, use the index keyword end:
n
(config)> add service ntp server end time.server.com
(config)>
To add the NTP server in another location in the list, use an index value to indicate the
n
appropriate position. For example:
(config)> add service ntp server 1 time.server.com
(config)>
Note
This list is synchronized with the list of servers included with NTP server configuration,
and changes made to one will be reflected in the other. See
server
for more information about NTP server configuration.
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Test the connection to the NTP servers
The following procedure tests the configured NTP servers for connectivity. This test does not affect
the device's current local date and time.
Command line
Digi Connect EZ Mini User Guide
System time
Configure the device as an NTP
333
Advertisement
Table of Contents
