Table of Contents
Advertisement
Services
Allow remote access for web administration and SSH
By default, only devices connected to the Connect EZ's LAN have access to the device via web
administration and SSH. To enable these services for access from remote devices:
The Connect EZ device must have a publicly reachable IP address.
n
The External firewall zone must be added to the web administration or SSH service. See
n
Firewall configuration
See
Set the idle timeout for Connect EZ users
n
timeout for the web administration and SSH services.
To allow web administration or SSH for the External firewall zone:
Add the External firewall zone to the web administration service
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Web administration > Access Control List > Zones.
4. For Add Zone, click .
5. Select External.
6. Click Apply to save the configuration and apply the change.
Digi Connect EZ Mini User Guide
Allow remote access for web administration and SSH
for information on zones.
for information about setting the inactivity
248
Advertisement
Table of Contents
