Table of Contents
Advertisement
User authentication
The amount of time that the user is locked out of the system after the specified number of
n
unsuccessful login attempts.
An optional public ssh key, to authenticate the user when using passwordless SSH login.
n
Two-factor authentication information for user login over SSH, telnet, and the serial console:
n
The verification type for two-factor authentication: Either time-based or counter-based.
l
The security key.
l
Whether to allow passcode reuse (time based verification only).
l
The passcode refresh interval (time based verification only).
l
The valid code window size.
l
The login limit.
l
The login limit period.
l
One-time use eight-digit emergency scratch codes.
l
To configure a local user:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
4. In Add User, type a name for the user and click .
The user configuration window is displayed.
The user is enabled by default. To disable, click to toggle off Enable.
Digi Connect EZ Mini User Guide
Local users
428
Advertisement
Table of Contents
