Applications
> scp host 192.168.4.1 user admin remote /home/admin/bin/test.py local
/etc/config/scripts/ to local
admin@192.168.4.1's password: adminpwd
test.py
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Note
You can also create scripts by using the vi command when logged in with shell access.
Task two: Configure the application to run automatically
Note
This feature does not provide syntax or error checking. Certain commands can render the device
inoperable. Use with care.
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Scheduled tasks > Custom scripts.
4. For Add Script, click .
The script configuration window is displayed.
Digi Connect EZ Mini User Guide
Configure scripts to run manually
100%
36MB
11.1MB/s
00:03
365