Table of Contents
Advertisement
Diagnostics
v. For Source or destination TCP/UDP port, select whether the filter should apply to
packets when the port is the source, the destination, or both.
vi. Click Ignore this TCP/UDP port if the filter should ignore packets that use this port.
By default, is option is disabled, which means that the filter will capture packets that
use this port.
vii. Click to add additional port filters.
e. To create a filter that either captures or ignores packets from one or more specified MAC
addresses:
i. Click to expand Filter Ethernet MAC addresses.
ii. Click to add a MAC address.
iii. For Ethernet MAC address, type the MAC address to be captured or ingored.
iv. For Source or destination Ethernet MAC address, select whether the filter should
apply to packets when the Ethernet MAC address is the source, the destination, or
both.
v. Click Ignore this MAC address if the filter should ignore packets that use this port. By
default, is option is disabled, which means that the filter will capture packets that use
this port.
vi. Click to add additional MAC address filters.
f. To create a filter that either captures or ignores packets from one or more VLANs:
i. Click to expand Filter VLANs.
ii. Click to add a VLAN.
iii. For The VLAN to capture or ignore, type the number of the VLAN.
iv. Click Ignore this VLAN if the filter should ignore packets that use this port. By default,
is option is disabled, which means that the filter will capture packets that use this
port.
v. Click to add additional VLAN filters.
g. For Berkeley packet filter expression, type a filter using Berkeley Packet Filter (BPF)
syntax. See
syntax.
6. Add one or more interface to the capture filter:
a. Click to expand Device.
b. Click to add an interface to the capture setting instance.
c. For Device, select an interface.
d. Repeat to add additional interfaces to the capture filter.
7. (Optional) For Berkeley packet filter expression, type a filter using Berkeley Packet Filter
(BPF) syntax. See
syntax.
8. (Optional) Schedule the analyzer to run, using this capture filter, based on a specified event or
at a particular time:
Digi Connect EZ Mini User Guide
Example filters for capturing data traffic
Example filters for capturing data traffic
Analyze network traffic
for examples of filters using BPF
for examples of filters using BPF
591
Advertisement
Table of Contents
