Root And Admin Usernames And Passwords; Adding Port Administrators And Users; Ways To Configure The Digi Cm - Digi Connectware CM User Manual

Root and Admin Usernames and Passwords

Root and Admin Usernames and Passwords
The Digi CM comes with two default users, root and system admin.
Root's password
can be modified
through the com-
mand line interface
root
using the com-
mand passwd.
admin

Adding Port Administrators and Users

The system administrator and root user can add port administrators and users
easily with the web interface by choosing System administration > User
administration > Add user. Root's password must be modified from the
command line using the command passwd.

Ways to Configure the Digi CM

This section discusses the three ways to configure the Digi CM, web interface,
configuration menu, and command line interface.
Web Interface
The web interface provides an easy way to configure the Digi CM. The root
user and system administrator can configure all features from it. Port
The Digi web
administrators can configure ports, including port clustering, but cannot modify
interface features
HTTPS for secure
system settings. Users cannot use the web interface for configuration.
access.
To access the web interface, enter the Digi CM IP address or host name in a
browser's URL window. The following page is displayed after log in.
Configuration Menu
The root user and system administrator have full access to the configuration
menu from a Telnet session or a serial connection through the console port.
Functionality is similar to the web interface, with the exception of custom
10
User Name Default Password
dbps
admin
Chapter 1