Table of Contents
Advertisement
Get started with Connect EZ
Note
You can also use the Digi Navigator to access the web UI and configure the device. See
the web UI from the Digi
1. Make sure that an Ethernet cable is connected to the Connect EZ's Ethernet port and to a
laptop or PC.
2. Open a browser and enter the
3. Log into the device using the default user name and password. The default user name is admin
and the default password is the unique password printed on the label packaged with your
device.
4. After logging in, the local web admin dashboard is displayed.
The dashboard shows the current state of the device.
Dashboard
area
Description
Summarizes network statistics: the total number of bytes sent and received over all
Network
configured bridges and Ethernet devices.
activity
Digi Remote
Displays the device connection status for Digi Remote Manager, the amount of time
Manager
the connection has been up, and the Digi Remote Manager device ID.
See
Device
Displays the Connect EZ device's status, statistics, and identifying information.
Network
Displays the status of the network interfaces configured on the device.
Interfaces
For more information, see
NEXT STEP: Proceed to the next step:
Update the firmware on the Connect EZ
You should update the firmware on the device to ensure that you have the latest features.
1. Log into the Connect EZ Web UI as a user with Admin access.
2. On the main menu, click System. Under Administration, click Firmware Update.
3. Click Download from server.
Digi Connect EZ Mini User Guide
Step 6: Connect to the web UI and update the Connect EZ firmware
Navigator.
IP address
Using Digi Remote
Manager.
Using the web
interface.
Update the firmware on the Connect
for the device.
Access
EZ.
21
Advertisement
Table of Contents
