Table of Contents
Advertisement
Services
The Configuration window is displayed.
3. Click Services > Location > Destination servers.
4. For Add destination server, click .
5. (Optional) For Label, type a description of the location destination server.
6. For Destination server, enter the hostname or IP address of the remote host to which location
messages will be sent.
7. For Destination server port, enter the UDP or TCP port on the remote host to which location
messages will be sent.
8. For Communication protocol, select either UDP or TCP.
9. For Forward interval multiplier, select the number of Location update intervals to wait
before forwarding location data to this server. See
information about setting the Location update interval.
10. For NMEA filters, select the filters that represent the types of messages that will be forwarded.
By default, all message types are forwarded.
To remove a filter:
n
a. Click the down arrow () next to the appropriate message type.
b. Click Delete.
To add a message type:
n
a. For Add NMEA filter or Add TAIP filter, click .
b. Select the filter type. Allowed values are:
11. For TAIP filters, select the filters that represent the types of messages that will be forwarded.
By default, all message types are forwarded.
To remove a filter:
n
a. Click the down arrow () next to the appropriate message type.
b. Click Delete.
To add a message type:
n
a. For Add NMEA filter or Add TAIP filter, click .
b. Select the filter type. Allowed values are:
Digi Connect EZ Mini User Guide
GGA: Reports time, position, and fix related data.
l
GLL: Reports position data: position fix, time of position fix, and status.
l
GSA: Reports GPS DOP and active satellites.
l
GSV: Reports the number of SVs in view, PRN, elevation, azimuth, and SNR.
l
RMC: Reports position, velocity, and time.
l
VTG: Reports direction and speed over ground.
l
AL: Reports altitude and vertical velocity.
l
CP: Compact position: reports time, latitude, and longitude.
l
ID: Reports the vehicle ID.
l
LN: Long navigation: reports the latitude, longitude, and altitude, the horizontal
l
and vertical speed, and heading.
PV: Position/velocity: reports the latitude, longitude, and heading.
l
Location information
Configure the location service
for more
295
Advertisement
Table of Contents
