Table of Contents
Advertisement
System administration
6. For Maintenance window trigger type, select one of the following:
Check if interface is up, for Test Interface, select the interface.
n
Time period for maintenance window:
n
a. Click to expand Maintenance window.
b. For Start time, type the time of day that the maintenance window should start,
c. For Duration window, select the amount of time that the maintenance tasks will
d. For Frequency, select whether the maintenance window will be started every day,
If Check if Python Out-of-Service is set, the maintenance window will only start if the
n
Python Out-of-Service is set. See
information.
7. (Optional) Click to enable Device firmware update to instruct the system to look for any
updated device firmware during the maintenance window. If updated firmware is found, it will
then be installed.
Note
If your device is managed by a Digi Remote Manager configuration, the configuration
manages the device's firmware version. You should not enable this option.
8. The Modem firmware update option is not used with theConnect EZ.
9. (Optional) Click to enable Configuration check to allow for the configuration to be updated,
including by custom scripts, during the maintenance window.
10. (Optional) Configure automated checking for device and modem firmware updates:
a. Click to expand Firmware update check.
b. Device firmware update check is enabled by default. This enables to automated
checking for device firmware updates.
c. Modem firmware update check is enabled by default. This enables to automated
checking for modem firmware updates.
Digi Connect EZ Mini User Guide
using the syntax HH:MM. If Start time is not set, maintenance tasks are not
scheduled and will not be run.
The behavior of Start time varies depending on the setting of Duration window,
which is configured in the next step.
If Duration window is set to Immediately, all scheduled tasks will begin at the
l
exact time specified in Start time.
If Duration window is set to 24 hours, Start time is effectively obsolete and
l
the maintenance tasks will be scheduled to run at any time. Setting Duration
window to 24 hours can potentially overstress the device and should be used
with caution.
If Duration window is set to any value other than to Immediately or 24 hours,
l
the maintenance tasks will run at a random time during the time allotted for
the duration window.
If Duration window is set to one or more hours, the minutes field in Start time
l
is ignored and the duration window will begin at the beginning of the specified
hour.
be run. If Immediately is selected, all scheduled tasks will begin at the exact time
specified in Start time.
or once per week.
Schedule system maintenance tasks
Use Python to set the maintenance window
for further
526
Advertisement
Table of Contents
