Digi Connect EZ Mini User Manual page 202

Virtual Private Networks (VPN)
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN clients, type the following at the prompt:
> show openvpn client all
Client
---------------
OpenVPN_Client1
OpenVPN_Client2
>
3. To display details about a specific client:
> show openvpn client name OpenVPN_client1
Client
Enable
Status
Username
IP address
Remote
MTU
Zone
IP Address
Port
Use File
Metric
Protocol
Port
Type
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Digi Connect EZ Mini User Guide
Enable Status Username
------ ------- --------
true connected
true pending
: OpenVPN_client1
: true
: up
: user1
: 123.122.121.120
: 120.121.122.123
: 1492
: internal
: 192.168.30.1/24
: 1194
: true
: 0
: udp
: 1194
: tun
OpenVPN
Use File Zone
-------- --------
true internal
true internal
202