Table of Contents
Advertisement
Virtual Private Networks (VPN)
n
n
n
n
15. (Optional) For Management Priority, set the management priority for this IPsec tunnel. A
tunnel that is up and has the highest priority will be used for central management and direct
device access.
16. (Optional) To configure the device to connect to its remote peer as an XAUTH client:
a. Click to expand XAUTH client.
b. Click Enable.
c. Type the Username and Password that the device will use to authenticate as an
XAUTH client with the peer.
Digi Connect EZ Mini User Guide
Asymmetric pre-shared keys: Uses asymmetric pre-shared keys to authenticate
with the remote peer.
i. For Local key, type the local pre-shared key. This must be the same as the
remote key on the remote host.
ii. For Remote key, type the remote pre-shared key. This must be the same as
the local key on the remote host.
RSA signature: Uses a private RSA key to authenticate with the remote peer.
i. For Private key, paste the device's private RSA key in PEM format.
ii. Type the Private key passphrase that is used to decrypt the private key.
Leave blank if the private key is not encrypted.
iii. For Peer public key, paste the peer's public RSA key in PEM format.
SCEP certificates: Uses Simple Certificate Enrollment Protocol (SCEP) to download
a private key, certificates, and an optional Certificate Revocation List (CRL) to the
Connect EZ device from a SCEP server.
You must create the SCEP client prior to configuring the IPsec tunnel. See
a Simple Certificate Enrollment Protocol client
i. For SCEP Client, select the SCEP client.
X.509 certificate: Uses private key and X.509 certificates to authenticate with the
remote peer.
i. For Private key, paste the device's private RSA key in PEM format.
ii. Type the Private key passphrase that is used to decrypt the private key.
Leave blank if the private key is not encrypted.
iii. For Certificate, paste the local X.509 certificate in PEM format.
iv. For Peer verification, select either:
Peer certificate: For Peer certificate, paste the peer's X.509 certificate in
l
PEM format.
Certificate Authority: For Certificate Authority chain, paste the
l
Certificate Authority (CA) certificates. These must include all peer
certificates in the chain up to the root CA certificate, in PEM format.
for instructions.
IPsec
Configure
128
Advertisement
Table of Contents
