Table of Contents
Advertisement
System administration
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure the Connect EZ device to use custom factory default
settings
You can configure your Connect EZ device to use custom factory default settings. This way, when you
erase the device's configuration, the device will reset to your custom configuration rather than to the
original factory defaults.
Note
To clear the custom default configuration, press the RESET button, wait for the device to reboot,
then press the RESET button again.
Required configuration items
Custom factory default file
n
WebUI
1. Log into the Connect EZ WebUI as a user with Admin access.
2. Configure your Connect EZ device to match the desired custom factory default configuration.
For example, you may want to configure the device to use a custom APN or a particular
network configuration, so that when you reset the device to factory defaults, it will
automatically have your required network configuration.
3. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
Digi Connect EZ Mini User Guide
Erase device configuration and reset to factory defaults
517
Advertisement
Table of Contents
