Digi Connect EZ Mini User Manual page 172

Virtual Private Networks (VPN)
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Select System.
4. Click to disable HW crypto acceleration.
5. Click Apply to save the configuration and apply the change.
The device must be rebooted for the change to take effect. See

Command line
1. Log into the Connect EZ command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Disable hardware cryptographic acceleration:
(config)> system hycrypto false
>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
The device must be rebooted for the change to take effect. See
Digi Connect EZ Mini User Guide
Reboot your Connect EZ device.
Reboot your Connect EZ device.
IPsec
172