Table of Contents
Advertisement
System administration
b. Reboot the device:
Update firmware from a local file
WebUI
1. Download the Connect EZ operating system firmware from the Digi Support FTP site to your
local machine.
2. Log into the Connect EZ WebUI as a user with Admin access.
3. On the main menu, click System. Under Administration, click Firmware Update.
4. Click Choose file.
5. Browse to the location of the firmware on your local file system and select the file.
6. Click Update Firmware.
Command line
1. Download the Connect EZ operating system firmware from the Digi Support FTP site to your
local machine.
2. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
3. Load the firmware image onto the device:
> scp host hostname-or-ip user username remote remote-path local local-
path to local
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied
n
to the Connect EZ device.
local-path is the location on the Connect EZ device where the copied file will be placed.
n
For example:
Digi Connect EZ Mini User Guide
> reboot
>
Update system firmware
509
Advertisement
Table of Contents
