Table of Contents
Advertisement
Interfaces
To configure the Connect EZ device to reboot when an interface has failed:
WebUI
SureLink can be configured for both IPv4 and IPv6.
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
3. The Configuration window is displayed.
4. Click Network > Interfaces.
5. Create a new WAN or select an existing one:
To create a new WAN, see
n
To edit an existing WAN, click to expand the appropriate WAN.
n
6. After creating or selecting the WAN, click IPv4 (or IPv6) > SureLink.
7. Enable SureLink.
8. SureLink can be enabled for both IPv4 and IPv6 configurations. By default, SureLink is enabled
for IPv4 for the preconfigured WAN. It is disabled for IPv6.
9. Enable Reboot device.
Note
If both the Restart interface and Reboot device parameters are enabled, the Reboot
device parameter takes precedence.
10. Click to expand Test targets.
11. For Add Test Target, click .
12. Select the Test type:
Ping test: Tests connectivity by sending an ICMP echo request to the hostname or IP
n
address specified in Ping host. You can also optionally change the number of bytes in
the Ping payload size.
DNS test: Tests connectivity by sending a DNS query to the specified DNS server.
n
HTTP test: Tests connectivity by sending an HTTP or HTTPS GET request to the URL
n
specified in Web servers. The URL should take the format of http[s]://hostname/
[path].
Test DNS servers configured for this interface: Tests connectivity by sending a DNS
n
query to the DNS servers configured for this interface.
Test the interface status: The interface is considered to be down based on:
n
Down time: The amount of time that the interface can be down before this test is
l
considered to have failed.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and
take the format number{w|d|h|m|s}.
For example, to set Down time to ten minutes, enter 10m or 600s.
The default is 60 seconds.
Initial connection time: The amount of time to wait for an initial connection to the
l
interface before this test is considered to have failed.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and
take the format number{w|d|h|m|s}.
Digi Connect EZ Mini User Guide
Configure a Wide Area Network
Wide Area Networks (WANs)
(WAN).
60
Advertisement
Table of Contents
