Interfaces; Wide Area Networks (Wans) - Digi Connect EZ Mini User Manual

Interfaces

Connect EZ devices has a WAN physical communications interface.

Wide Area Networks (WANs)

The Connect EZ device is preconfigured with one Wide Area Network (WAN), named ETH1.
You can modify configuration settings for the existing WAN, and you can create new WANs.
This section contains the following topics:
Wide Area Networks (WANs)
Configure WAN priority and default route metrics
Configure SureLink active recovery to detect WAN failures
Configure the device to reboot when a failure is detected
Disable SureLink
Configure a Wide Area Network (WAN)
Show WAN status and statistics
Delete a WAN
Digi Connect EZ Mini User Guide
50
50
52
59
65
69
75
77
49