About the development board
Placement of module
CAUTION! When handling the development, wear a grounding wrist strap to avoid ESD
damage to the board.
Port descriptions
The development board provides the following ports:
Primary serial port, P1
n
Secondary serial port, P2
n
GPIO port, P7
n
See the figure titled
sections describe the ports.
Primary serial port, P1
The primary serial port is a DB-9 male connector that is labeled as P1 on the development board. See
the following figure for pin orientation; see the following table for pin assignments.
Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 Hardware Reference Manual
Board layout and connector locations
for the location of the ports. The following
Port descriptions
22