Table of Contents
Advertisement
Central management
2. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
To view the status of your device's connection to Remote Manager, use the
the command line:
Command line
> show cloud
Device Cloud Status
-------------------
Status
: Connected
Server
: my.devicecloud.com
Device ID : 00000000-00000000-0040FFFF-FF0F4594
>
The Device ID is the unique identifier for the device, as used by the Remote Manager.
Configure multiple devices using profiles
Digi recommends you take advantage of Digi Remote Manager profiles to manage multiple Connect
EZ routers. Typically, if you want to provision multiple Connect EZ routers:
1. Using the Connect EZ local WebUI, configure one Connect EZ router to use as the model
configuration for all subsequent Connect EZs you need to manage.
2. Register the configured Connect EZ device in your Digi Remote Manager account.
3. In Digi Remote Manager, create a profile based on the configured Connect EZ.
4. Apply the profile to the Connect EZ devices you need to configure.
Digi Remote Manager provides multiple methods for applying profiles to registered devices. You can
also include site-specific settings with a profile to override settings on a device-by-device basis.
Learn more
For information on using Digi Remote Manager to configure and manage Connect EZ routers,
n
see the
Digi Remote Manager User
For information on using Digi Remote Manager APIs to develop custom applications, see the
n
Digi Remote Manager Programmer
Digi Connect EZ Mini User Guide
Configure multiple devices using profiles
Guide.
Guide.
show
cloudcommand at
563
Advertisement
Table of Contents
