Digi Connect EZ Mini User Manual page 237

Virtual Private Networks (VPN)
11. Configure test targets:
a. Add a test target:
(config vpn l2tp lac lac_tunnel)> add surelink target end
(config vpn l2tp lac lac_tunnel surelink target 0)>
b. Set the test type:
(config vpn l2tp lac lac_tunnel surelink target 0)> test value
(config vpn l2tp lac lac_tunnel surelink target 0)>
where value is one of:
n
n
n
n
n
Digi Connect EZ Mini User Guide
ping: Tests connectivity by sending an ICMP echo request to a specified hostname
or IP address.
Specify the hostname or IP address:
l
(config vpn l2tp lac lac_tunnel surelink target 0)> ping_host
host
(config vpn l2tp lac lac_tunnel surelink target 0)>
(Optional) Set the size, in bytes, of the ping packet:
l
(config vpn l2tp lac lac_tunnel surelink target 0)> ping_size
[num]
(config vpn l2tp lac lac_tunnel surelink target 0)>
dns: Tests connectivity by sending a DNS query to the specified DNS server.
Specify the DNS server. Allowed value is the IP address of the DNS server.
l
(config vpn l2tp lac lac_tunnel surelink target 0)> dns_
server ip_address
(config vpn l2tp lac lac_tunnel surelink target 0)>
dns_configured: Tests connectivity by sending a DNS query to the DNS servers
configured for this interface.
http: Tests connectivity by sending an HTTP or HTTPS GET request to the specified
URL.
Specify the url:
l
(config vpn l2tp lac lac_tunnel surelink target 0)> http_url
value
(config vpn l2tp lac lac_tunnel surelink target 0)>
where value uses the format http[s]://hostname/[path]
interface_up: The interface is considered to be down based on the interfaces down
time, and the amount of time an initial connection to the interface takes before this
test is considered to have failed.
(Optional) Set the amount of time that the interface can be down before this
l
test is considered to have failed:
L2TP
237