Table of Contents
Advertisement
System administration
Note
You may want to save your configuration settings to a file before rebooting. See
configuration to a
Reboot your device immediately
WebUI
1. Log into the Connect EZ WebUI as a user with Admin access.
2. From the main menu, click System.
3. Click Reboot.
4. Click Reboot to confirm that you want to reboot the device.
Command line
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> reboot
Schedule reboots of your device
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Select System > Scheduled tasks.
4. For Reboot time, enter the time of the day that the device should reboot, using the format
HH:MM. The device will reboot at this time every day.
Digi Connect EZ Mini User Guide
file.
Reboot your Connect EZ device
Save
512
Advertisement
Table of Contents
