Digi Connect EZ Mini User Manual page 626

Command line interface
Either of these methods will display the following information:
config> service ?
Services
Additional Configuration
------------------------------------------------------------------------
--
dns
mdns
multicast
ntp
remote_control
snmp
ssh
telnet
web_admin
(config)> service
3. Next, to display help for the service ssh command, use one of the following methods:
At the config prompt, enter service ssh ?:
n
(config)> service ssh ?
At the config prompt:
n
a. Enter service to move to the service node:
b. Enter ssh to move to the ssh node:
c. Enter ? to display help for the ssh node:
Either of these methods will display the following information:
(config)> service ssh ?
SSH: An SSH server for managing the device.
Parameters
------------------------------------------------------------------------
--
enable
key
Digi Connect EZ Mini User Guide
DNS
Service Discovery (mDNS)
Multicast
NTP
Remote control
SNMP
SSH
Telnet
Web administration
(config)> service
(config service)>
(config service)> ssh
(config service ssh)>
(config service ssh)> ?
Current Value
true
[private]
Configuration mode
Enable
Private key
626