Table of Contents
Advertisement
Virtual Private Networks (VPN)
12. For Response timeout, type the amount of time that the device should wait for a response to
a probe attempt before considering it to have failed.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format number{w|d|h|m|s}.
For example, to set Response timeout to ten minutes, enter 10m or 600s.
The default is 15 seconds.
13. Add a test target:
a. Click to expand Test targets.
b. For Add Test target, click .
c. Select the Test type:
n
n
n
n
n
n
Digi Connect EZ Mini User Guide
Test another interface's status: Allows you to test another interface's status, to
create a failover or coupled relationship between interfaces. If Test another
interface's status is selected:
For Test Interface, select the alternate interface to be tested.
l
For IP version, select the alternate interface's IP version. This allows you to
l
determine the alternate interface's status for a particular IP version.
For Expected status, select whether the expected status of the alternate
l
interface is Up or Down. For example, if Expected status is set to Down, but
the alternate interface is determined to be up, then this test will fail.
Ping test: Tests connectivity by sending an ICMP echo request to the hostname or
IP address specified in Ping host. You can also optionally change the number of
bytes in the Ping payload size.
DNS test: Tests connectivity by sending a DNS query to the specified DNS server.
HTTP test: Tests connectivity by sending an HTTP or HTTPS GET request to the
URL specified in Web servers. The URL should take the format of http
[s]://hostname/[path].
Test DNS servers configured for this interface: Tests connectivity by sending a
DNS query to the DNS servers configured for this interface.
Test the interface status: The interface is considered to be down based on:
Down time: The amount of time that the interface can be down before this test
l
is considered to have failed.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and
take the format number{w|d|h|m|s}.
For example, to set Down time to ten minutes, enter 10m or 600s.
The default is 60 seconds.
Initial connection time: The amount of time to wait for an initial connection to
l
the interface before this test is considered to have failed.
IPsec
155
Advertisement
Table of Contents
