Table of Contents
Advertisement
Virtual Private Networks (VPN)
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > SCEP Client.
4. For Add clients, enter a name for the SCEP client and click .
The new SCEP client configuration is displayed.
5. Click Enable to enable the SCEP client.
6. For Renewable Time, type the number of days that the certificate enrollment can be renewed,
prior to the request expiring. This value must match the setting of the Allow renewal x days
before the certified is expired option on the Fortinet server.
7. (Optional) For CRL file name, type the filename of the Certificate Revocation List (CRL) from the
CA. The filename of the CRL corresponds to the Certificate ID of the CA created on the Fortinet
server, for example, fortinet_example_ca.crl.
8. Click to expand SCEP server.
9. For FQDN, type the fully qualified domain name or IP address of the Fortinet server.
10. For Password, type the challenge password. This corresponds to the Default enrollment
password on the Fortinet server.
Digi Connect EZ Mini User Guide
IPsec
168
Advertisement
Table of Contents
