YASKAWA MP210 Series User Manual page 286

Appendix B Current Value and Setting Data in SVB Definition
(7) Saving Data to Flash Memory
The data flow for SERVOPACK parameters is as follows when saving the parameters to flash memory on the
MPE720:
• The MP2100 writes the parameters data (Input Data) held in SDRAM to flash memory.
Display
Note: 1. Save to flash memory also after having changed set data of SERVOPACK parameter.
B-10
Host Computer
MPE720
SRAM
Input
Current
Data
Value
Flash
Memory
SERVOPACK Parameters
Input
Data
HDD
2. indicates data has been written.
MECHATROLINK
Send
System
Software
SDRAM RAM
(All Axes)
Send
Control
Software
EEP
-ROM
Parameters
SERVOPACK SERVOPACK