YASKAWA MP210 Series User Manual page 138

4 System Startup and Sample Programs
4.3.2 Reading Sample Programs and Setting and Saving Parameters
4. Click the Yes button in the TrnSys dialog box.
The data is saved to flash memory.
When saving to flash memory has been completed, a dialog box to confirm that the CPU is to be run is
displayed.
5. Click the Yes button.
Then the display automatically returns to the Save Flash Memory Content window.
6. Select File - Exit to exit saving to flash memory.
This completes the saving of data to flash memory.
(7) Dumping All Data
Use the following procedure to execute All Program File Dump to back up to a personal computer the module
configuration definitions automatically detected by the MP2100 during self-configuration and edited programs.
The MP2100 program data and the program data in the personal computer hard disk are synchronized when all
programs are dumped.
1. Right-click the Controller Folder in which the sample programs have been saved, and select Transfer - All
Files - From Controller to MPE720 from the pop-up menu.
An Execute dialog box appears.
4-44