YASKAWA MP210 Series User Manual page 13

 Maintenance and Inspection Precautions
• Do not attempt to disassemble the MP2100/MP2100M.
There is a risk of electrical shock or injury.
• Do not change wiring while power is being supplied.
There is a risk of electrical shock or injury.
• When replacing the MP2100/MP2100M, transfer the programs and parameters from the old control-
ler to the new controller before restarting operation.
There is a risk of device damage.
 Disposal Precautions
• Dispose of the MP2100/MP2100M as general industrial waste.
 General Precautions
• The products shown in illustrations in this manual are sometimes shown without covers or protective guards. Always
replace the cover or protective guard as specified first, and then operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match the product you received.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa representative or one of the
offices listed on the back of this manual.
CAUTION
CAUTION
Observe the following general precautions
to ensure safe application.
xiii