YASKAWA MP210 Series User Manual page 280

Appendix B Current Value and Setting Data in SVB Definition
(3) When the SERVOPACK Tab Page Is Open
The data flow for SERVOPACK parameters is as follows when the SERVOPACK tab page is open in the SVB
Definition
SVB Definition.
• The MPE720 reads and displays the parameters that are held in the SERVOPACK's RAM for the relevant
axis to the Current Value in the SERVOPACK tab page.
It also reads and displays the parameters that are held in the MP2100's SDRAM in the Input Data in the
SERVOPACK
Display
Note:
The following figure shows an example of the SERVOPACK tab in the SVB Definition window. The values in
Current Value are different from the values in Input Data.
B-4
window of the MPE720. For details on how to open the SERVOPACK tab page, refer to 2.2.5 (4) (b)
tab page.
Host Computer
MPE720
SRAM
Input Current
Data Value
Flash
Memory
Input
SERVOPACK Parameters
Data
HDD
indicates data has been written.
MECHATROLINK
Send
System
Software
SDRAM RAM
Parameters
(All Axes)
Send
Control
Software
EEP
-ROM
SERVOPACK SERVOPACK