Executing A Utility In The Utility/Shotbox Control Block - Sony DVS-9000SF User Manual

Executing a Utility in the Utility/Shotbox Control Block

Bank selection buttons
By default, the memory recall buttons in the utility/shotbox control block are
assigned to shotbox registers 1 to 96, in banks 1 to 4 (see page 228), but in the
setup menu, you can assign these to any 96 actions.
To execute an assigned action
Use the following procedure.
When the action is to execute a shotbox register, follow the procedure in
"Shotbox Execution in the Utility/Shotbox Control Block" (page 228).
1
Press one of the bank selection buttons [BANK1] to [BANK4] to select a
bank.
• The bank selection button you pressed lights amber.
• For the selected bank, the memory recall buttons show the button
numbers and corresponding button states. If a button has been given a
name in the setup menu, this name appears.
Not lighted: buttons with nothing saved
Lit orange: buttons holding a utility command or menu shortcut
BANK
1 2
1
BANK
7 8
2
BANK
13 14
3
BANK
19 20
4
Memory recall buttons
Utility/shotbox control block (MKS-8033)
3 4 5
9 10 11
15 16 17
21 22 23
6
12
18
24
219
Utility Execution