Recalling A Macro Register And Executing A Macro - Sony DVS-9000 User Manual

Recalling a Macro Register and Executing a Macro

To carry out a macro operation, recall a macro register. Recalling an empty
register allows you to carry out macro editing operations. Recalling a register
holding a macro executes the macro immediately.
To recall a macro register, use the following procedure.
1
2
460
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
STOP
EFF
NEXT
LOOP
KF
NORM REV
NORM
FF
/REV
RE
WIND
RUN
In the numeric keypad control block, press the [MCRO] button, turning it
on.
This assigns the numeric keypad control block to macro operations, and
the [RCALL] button lights.
Enter the number of the register to be recalled with the numeric keypad
buttons.
To search for an empty register, instead of entering a number, press the [.]
(period) button.
The display shows the corresponding register number. A letter "E" after
the number indicates that the corresponding register is empty.
EDIT ENBL button
AUTO INS button
PAUSE button
EDIT
ENBL
KF EFF TURN KF
PAUSE
DUR DUR OVER LOOP
CONST AUTO GO TO GO TO
DELAY
DUR INS TC KF
FROM
COPY PASTE ALL
TO
DEL MOD UNDO
PREV NEXT
SHIFT INS
KF KF
Edit point specification buttons
Editing buttons