Cfm Loop-Back - Panasonic GA-ML Series Manual

10.4.5

CFM Loop-back

Use the following window to display the definition of CFM loop-back.
Choose CFM > CFM Loop-back to display the following window.
In the section of CFM Loop-back, you can configure the following
parameters.
Parameter
MAC Address
MEPDID
Click Apply to reflect the change.
10 OAM (Operations, Administration & Management)
Figure 10-17 CFM Loop-back
This parameter displays a MAC address.
This parameter displays MEPID. The range is from 1 to
8,191.
10.4.5 CFM Loop-back
Overview
387