Panasonic GA-ML Series Manual page 142

In the section of the settings on IGMP Snooping Limitation, you can
configure the following parameters.
Parameter
From Port to Port:
from the Beggining
to the End
Number of
Limitations
Exceed Action
Except ACL Name
VID
Click Apply to add new entries based on the information specified.
Click Delete to delete entries based on the information specified.
5.7.1.3 IGMP Snooping Filter Settings
Choose the port you use.
Enter the number of limitations. Use this parameter to
limit the number of IGMP cash-entries, which can be
created. The range is from 1 to 4,096.
Choose an exceed action. Use this parameter to specify
the operation to process the group, which is newly
recognized when exceeding the limitation. The options
available are as follows.
• Default - The default action is executed.
• Drop - A new group is dropped.
• Replace - A new group is replaced to the oldest
group.
Enter the name of the standard IP access-list. The group
(*,G) or channel (S,G), which are allowed based on the
access list, are excluded from the limitation. To
authorize a channel (S,G), specify "S" in the field of
source-address of the access-list entry and "G" in the
destination-address field. To authorize a group (*,G),
specify "any" in the source-address field of the access-
list entry and "G" in the destination-address field. The
number of characters for the name can be up to 32. Or,
click Please Choose to search and choose the existing
access list, which is configured by a switch, for using this
configuration.
Enter the VLAN ID you use. The range is from 1 to
4,094.
5 L2 Features
Overview
140