Ethernet Oam (Discovery Information) - Panasonic GA-ML Series Manual

10.3.2

Ethernet OAM (Discovery Information)

Use the following window to display the discovery information on the
Ethernet OAM.
Choose OAM > Ethernet OAM > Discovery Information to display the
following window.
In the section of Discovery Information, you can configure the
following parameters.
Parameter
Port
Ethernet OAM
Remote MAC Address This parameter displays a remote MAC address of the
Port
Administrator Status
Mode
Remote Loop-back
Remote Loop-back
Status
Monitoring Link
PDU Revision
MAC Address
10 OAM (Operations, Administration & Management)
10.3.2 Ethernet OAM (Discovery Information)
Figure 10-10 Discovery Information
This parameter displays the port of the Internet OAM
settings.
This parameter displays if the Internet OAM settings is
enabled or disabled.
Internet OAM settings.
This parameter displays the port of the Internet OAM
settings.
This parameter displays if the Internet OAM settings is
enabled or disabled.
This parameter displays if the Internet OAM mode is
active or passive. The default is active.
This parameter displays the beginning (support)/end
(no support) of the remote loop-back.
This parameter displays the state of the remote loop-
back.
This parameter displays the beginning (support)/end
(no support).
This parameter describes about a PDU revision.
This parameter displays a MAC address of a remote
client.
Overview
379